1Materials

Step 1 of 6

2Size & Mount

Step 2 of 6

3Valance

Step 3 of 6

4Controls

Step 4 of 6

5Hardware

Step 5 of 6

6Product Label

Step 6 of 6

Review Your Order

New this season
  • Cross Hatch/ Truffle 16150
    Loading swatch...
    • Material: Cross Hatch  Truffle
    • SKU: 16150
  • Herringbone/ Natural 16142
    Loading swatch...
    • Material: Herringbone  Natural
    • SKU: 16142
  • Sheer Stripe/ Sand 16127
    Loading swatch...
    • Material: Sheer Stripe  Sand
    • SKU: 16127
  • Sunset/ Cross Hatch Natural 16155
    Loading swatch...
    • Material: Sunset  Cross Hatch Natural
    • SKU: 16155
  • Sunset/ Cross Hatch Spice 16157
    Loading swatch...
    • Material: Sunset  Cross Hatch Spice
    • SKU: 16157
  • Sunset/ Sheer Stripe Natural 16131
    Loading swatch...
    • Material: Sunset  Sheer Stripe Natural
    • SKU: 16131

View all

    • General tips

      Use a metal measuring tape to ensure accuracy.
      Round down to the nearest 1/8".
      Measure every window, even if they appear identical.
      If you're measuring more than one window in a room, work from left to right and label every window.
      Download a handy worksheet here.

      Mounting inside window frame

      Inside mounts provide a finished, built-in look, without covering the window molding. You need a minimum of 2" unobstructed mounting depth within your window frame (most product styles). If your frame isn't deep enough for the style you've chosen, use an outside mount.

      Please note that inside mounted treatments will have a light gap; for Roller and Solar Shades, there will be a 5/8" - 7/8" gap on each side to accommodate the roller mechanism. Shade fabric will be 1-5/16" - 1-5/8" narrower than your ordered width. If you need maximum light control and privacy, consider an outside mount.

      1. Measure the inside width as indicated below:

      Your blind or shade will be made slightly smaller than the size you specify to allow operating clearance. Do not add to the size of your product for a tighter fit. If you do, it will not fit properly inside your window.

      2. Measure the frame depth from the closed window, or any obstacle such as a window handle, crank or alarm sensor, to the edge.

      Obstacles can interfere with your treatment's operation, and you may wish to consider an inside mount.

      Mounting outside window frame

      Outside mounts can make a window appear larger. When windows are not square, or there is insufficient frame depth for inside mounting, an outside mount is recommended.

      Please note that a minimum of 2" flat surface above the window or on the window frame is required for mounting brackets (most product styles).

      1. Measure the outside width of the area you wish to cover. If space allows, we recommend adding overlap to reduce light per the chart below. This is your ordering width.

      2. Measure the height of the area you wish to cover. If space allows, we recommend adding overlap to reduce light per the chart below. This is your ordering height.

      Download complete measure guide.
      Dimensions    What's this  
      • Measuring Guide Installation Instructions
      • Width (in.)
      • Height (in.)
    • Two separate, independently operating shades on one headrail make it easier to control light and privacy. Ideal choice for wider windows.

      Headrail    What's this  
      Headrail[clear]
      • answer image
      • answer image
    • Inside Mount: mounted within the window frame. Small deductions will be taken to ensure proper fit.

      Outside Mount: mounted on wall or molding surrounding the window.

      Mount    What's this  
      Mount[clear]
      • answer image
      • answer image
      • answer image
    • Multiple Shade Dimensions
    • Select in Bronze, White, Ivory or Black, all colors come with insert that matches your shade material.

      Valance    What's this  
      Valance [clear]
    • Loop Control allows you to raise your shade smoothly with little effort. This feature allows for even placement of your shade when it is partially raised. Our Loop Control is available in your choice of colored plastic bead or metal chain, or a standard white braided nylon cord. Plastic bead chains are available in white or black; Metal bead chains are available in bronze or silver.

      Cord loop length depends on the height of your shade; standard length is approximately 2/3 the height of the shade or you may choose a longer or shorter length depending on your specific needs. Loop control cords (either standard; beaded plastic or metal) are available in larger set sizes up to 180".



      Our Retractable Cord Lift System Raise, lower and tilt with a retractable cord. Simply pull down and to center to lower shade and open vanes; pull down and to side to close vanes and raise the shade. Decorative Cassette System is required and available in 3 finishes. The retractable cord length is 2/3rd the length of the shade minus 2".


      Our Cordless Lift System allows you to raise and lower your Sheer Shades with ease. With this great new lift system comes the added benefit of safety by eliminating all the lift cords. To open and close your shade simply push from the bottom up to open the shade and pull down to lower the shade. The Cordless Lift comes standard with a handle that is mounted to the bottom of your shade so your not using that bottom rail to raise and lower your shade.


      NEW! Motivia Motorization Raise and lower shades with the touch of a button - Motivia is the most affordable and user-friendly motorization available. Shades without lift cords are the safest option for homes with children and pets, and Motivia motorization is simple and easy to install and use. Available with wand or remote control options.

      Motorization Control    What's this  
      Motorization Control[clear]
      • answer image
      • answer image
      • answer image
    • Battery Pack Wire The 10" wire will have the battery pack clipped to the headrail of the shade. The 48" battery wire allows you to mount the battery wand lower in the window, to make changing batteries easier. Perfect for very tall windows, or for situations where it's otherwise awkward to get to the top of the shade. You may mount the wand in the window frame as much as 4 feet below the top of the shade with this option.

      Motivia Wand Standard wand length is approximately 1/2 the height of the shade. Choose a custom length up to 56" for taller windows.

      Control Size    What's this  
      Battery Pack Wire [clear]
      Wand Size [clear]
      • Wand Height (in.)
    • Motivia Motorization Channel Each channel on our 5-channel Motivia remote controls an individual shade, or a group of shades. Simply select the channel you'd like to assign your shade to, and we'll pre-program the remote accordingly. To have a group of shades work from the same channel, select the same channel number while customizing your additional shades.

      If you change your mind later, it's easy to re-assign channels. Simple instructions will arrive with your shade.

      Remote    What's this  
      Channel To Program [clear]
      Remote [clear]
      Remote [clear]
      Remote Color [clear]
    • Control Position
      Control Position [clear]
    • Hold down clips are mounted at the bottom of the window treatment. This option is great for securing your treatment on doors or in windy locations
      Hardware    What's this  
      Hold Downs [clear]
      Extension Brackets [clear]
    • Product Label
      Room Type [clear]
      Window Description
    REVIEW

    Review your selection below-you can click on any option to review or make changes. Once you have completed & confirmed your information, add the item to your cart.

    • Materials:
    • Size & Mount:
    • Valance:
    • Controls:
    • Hardware:
    • Product Label:

    This item has been added to your cart.

    • Materials:
    • Size & Mount:
    • Valance:
    • Controls:
    • Hardware:
    • Product Label:

    TOTAL $ Tell us your dimensions to see prices