2" slat cordless Wood Blinds add safety and convenience, allowing blinds to be raised, lowered and accurately positioned with push/pull of bottom rail; eliminates visible and dangling cords. 2" slat size offers clean, classic appeal and proportions that work well in windows of almost any size. Custom sizes from 12'' to 72" high, 18" to 72" wide.
All of our Wood Blinds come with a sleek standard wood valance. For enhanced style, and to complement other molding or trim in your room, consider one of our 6 exclusive and very affordable Valance Upgrades.
Our elegant Crown style Valance profile adds impact with distinctive angular, mitered corners. Crown style requires 2" additional wall clearance on each side. Available for outside mount only. Offered in Georgetown, Westchester and Rope designs; not available with Standard Valance.
|Custom Valance Width|
Inside Mount Return
Returns enhance the fine furniture look of inside-mounted Wood Blinds by covering the sides of the headrail that extend beyond the window frame.
Outside Mount Return
The standard return for outside mount is 2-1/2”. This size will be extended if extension brackets are requested.
Wand or Cord Tilt: Our Wood Blinds come standard with cord tilts (2 hanging cords). A wand tilt (shown at left) is also available. Wand is approximately 2/3 the height of the blind. Wand tilt operates with a twisting motion. Wand tilt not available with Loop Control.
If your window is located in a hard-to-reach place and need the tilt to hang lower, a longer wand or cord can be requested.
|Custom Wand Length|
|Custom Cord Tilt Length|
Hold downs: Clips are mounted at the bottom of the window treatment. This option is great for securing your treatment on doors or in windy locations.
Extension Brackets: Used for outside mount installation requiring additional clearance between the window treatment and the mounting surface. Clear obstructions such as molding, window cranks, door handles, etc. Blinds over 72" in width will come with center support brackets.