1Materials

Step 1 of 6

2Size & Mount

Step 2 of 6

3Lining

Step 3 of 6

4Controls

Step 4 of 6

5Hardware

Step 5 of 6

6Product Label

Step 6 of 6

Review Your Order

New this season
  • Malibu/ Ivory 14114
    Loading swatch...
    • Material: Malibu  Ivory
    • SKU: 14114
  • Malibu/ Linen 17359
    Loading swatch...
    • Material: Malibu  Linen
    • SKU: 17359
  • Malibu/ Sand 14116
    Loading swatch...
    • Material: Malibu  Sand
    • SKU: 14116
  • Newport/ Ivory 14118
    Loading swatch...
    • Material: Newport  Ivory
    • SKU: 14118
  • Newport/ Sand 14120
    Loading swatch...
    • Material: Newport  Sand
    • SKU: 14120
  • Newport/ White 17358
    Loading swatch...
    • Material: Newport  White
    • SKU: 17358

View all

    • General tips

      Use a metal measuring tape to ensure accuracy.
      Round down to the nearest 1/8".
      Measure every window, even if they appear identical.
      If you're measuring more than one window in a room, work from left to right and label every window.
      Download a handy worksheet here.

      Mounting inside window frame

      Inside mounts provide a finished, built-in look, without covering the window molding. You need a minimum of 2" unobstructed mounting depth within your window frame (most product styles). If your frame isn't deep enough for the style you've chosen, use an outside mount.

      Please note that inside mounted treatments will have a light gap; if you need maximum light control and privacy, consider an outside mount.

      1. Measure the inside width as indicated below:

      Your blind or shade will be made slightly smaller than the size you specify to allow operating clearance. Do not add to the size of your product for a tighter fit. If you do, it will not fit properly inside your window.

      2. Measure the frame depth from the closed window, or any obstacle such as a window handle, crank or alarm sensor, to the edge.

      Obstacles can interfere with your treatment's operation, and you may wish to consider an inside mount.

      Mounting outside window frame

      Outside mounts can make a window appear larger. When windows are not square, or there is insufficient frame depth for inside mounting, an outside mount is recommended.

      Please note that a minimum of 2" flat surface above the window or on the window frame is required for mounting brackets (most product styles).

      1. Measure the outside width of the area you wish to cover. If space allows, we recommend adding overlap to reduce light per the chart below. This is your ordering width.

      2. Measure the height of the area you wish to cover. If space allows, we recommend adding overlap to reduce light per the chart below. This is your ordering height.

      Download complete measure guide.
      Dimensions    What's this  
      • Measuring Guide Installation Instructions
      • Width (in.)
      • Height (in.)
    • Outside Mount shades are mounted on your wall or molding (rather than within window frame). Even if your windows have enough frame depth for Inside Mount, you may prefer the extra room darkening and privacy Outside Mount provides, since greater window coverage reduces light leak at shade edges.

      Inside Mount shades are contained within your window frame. Classic Pleat Shades require at least a 1/2" frame depth for Inside Mount (required depth varies with some upgrades). You may prefer an Inside Mount because it provides a finished look without covering your molding; it also allows more clearance to layer Drapery, or a Valance over shades. Before choosing Inside Mount, be sure to check your windows for "squareness", since Inside Mounted shades will not operate properly if windows are not "square."

      Side Mount is useful when shades cannot be mounted to the top of the window frame. Maximum width for Side Mount is 48".

      Mount    What's this  
      Mount[clear]
      • answer image
      • answer image
      • answer image
    • Integrate the appearance of side-by-side windows and increase light control options by having two separate shades operating independently on one headrail. Minimum width 44"; maximum height 120".
      Headrail    What's this  
      Headrail[clear]
      • answer image
      • answer image
      • Left Shade Width (in.)
      • Right Shade Width (in.)
    • Pleated materials gently filter light. For total light blocking in nurseries or media rooms, choose Blackout Lining; add 35%. Lining will have a white streetside appearance.
      Lining    What's this  
      Lining [clear]
    • Standard lift system allows you to raise and lower your blind with a control cord. The control cord may be placed on the left or the right side of the blind. Cords should be kept out of reach of small children and pets for added safety.

      Loop Control Easily and precisely raise, lower and position shade with continuous cord.

      Top Down/Bottom Up Lower shade form the top or raise from the bottom, for maximum light control and privacy. Maximum width 72".

      NEW! Easy Lift Cordless: Push the button to easily and precisely raise, lower, and position blinds without visible lift cords. Maximum width 84". Maximum height 84".

      Motorization Raise and lower an entire room of window treatments with a single remote. Individual shades are outfitted with battery-powered motors. Maximum width 84".

      Lift System    What's this  
      Lift System[clear]
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
    • Lift cords raise, lower and position your entire shade. Select either left- or right-side location for your cords, taking into consideration your room configuration, ease of reaching lift cords behind furniture, etc. Cord tassels will be white/off white in color.

      Top Down/Bottom Up shades will have cords on both sides; one to control lowering the shade from the top, the other to control raising it from the bottom.

      2 on 1 Headrail controls will be on the outside of each shade. A cord cleat will also be provided with your shade, which must be installed and used properly to keep dangling lift cords out of the reach of small children and pets.

      Cord Position    What's this  
      Cord Position [clear]
    • Motivia Remote Raise and lower an entire room of window treatments with a single remote. Individual shades are outfitted with battery-powered motors. One remote will operate up to 5 shades. Order the remote on the first shade. Select Motivia Remote without remote control for up to 4 more shades. If you want additional remotes, simply order them on the individual shades.

      Motorization Control    What's this  
      Motorization Control[clear]
      • answer image
      • answer image
      • answer image
    • Battery Pack Wire The 10" wire will have the battery pack clipped to the headrail of the shade. The 48" battery wire allows you to mount the battery wand lower in the window, to make changing batteries easier. Perfect for very tall windows, or for situations where it's otherwise awkward to get to the top of the shade. You may mount the wand in the window frame as much as 4 feet below the top of the shade with this option.

      Control Size    What's this  
      Control Size [clear]
    • Motivia Motorization Channel Each channel on our 5-channel Motivia remote controls an individual shade, or a group of shades. Simply select the channel you'd like to assign your shade to, and we'll pre-program the remote accordingly. To have a group of shades work from the same channel, select the same channel number while customizing your additional shades.

      If you change your mind later, it's easy to re-assign channels. Simple instructions will arrive with your shade.

      Remote    What's this  
      Remote [clear]
      Remote Color [clear]
    • No charge option Hold-Down Clips are mounted at the lower corners of your shades to prevent the bottoms from moving; a great choice for shades mounted on doors or in windy locations.


      Your shades will have a standard clearance of approximately 3/8" from the mounting surface. Extension Brackets project your shades further away - 3" for a total of 3 3/8" - from the mounting surface, allowing them to clear obstacles such as door handles, window operating cranks and molding. Extension Brackets may only be used for Outside Mount, and may not be combined with Loop Control upgrade.

      Hardware    What's this  
      Hold Downs [clear]
      Extension Brackets [clear]
    • Product Label
      Room Type [clear]
      Window Description
    REVIEW

    Review your selection below-you can click on any option to review or make changes. Once you have completed & confirmed your information, add the item to your cart.

    • Materials:
    • Size & Mount :
    • Lining:
    • Controls:
    • Hardware:
    • Product Label:

    This item has been added to your cart.

    • Materials:
    • Size & Mount :
    • Lining:
    • Controls:
    • Hardware:
    • Product Label:

    TOTAL $ Tell us your dimensions to see prices