Step 1 of 6
2Size & Mount
Step 2 of 6
Step 3 of 6
Step 4 of 6
Step 5 of 6
Step 6 of 6
Review Your Order
New this season
- Material: Dove
- SKU: 3257
Ivory Lace 3274
- Material: Ivory Lace
- SKU: 3274
- Material: Pebble
- SKU: 14273
- Material: Snow
- SKU: 3259
Soft White 16327
- Material: Soft White
- SKU: 16327
Whipped Cream 3262
- Material: Whipped Cream
- SKU: 3262
General tipsDimensions What's this
Use a metal measuring tape to ensure accuracy.Mounting inside window frame
Round down to the nearest 1/8".
Measure every window, even if they appear identical.
If you're measuring more than one window in a room, work from left to right and label every window.
Download a handy worksheet here.
Inside mounts provide a finished, built-in look, without covering the window molding. You need a minimum of 2" unobstructed mounting depth within your window frame (most product styles). If your frame isn't deep enough for the style you've chosen, use an outside mount.
Please note that inside mounted treatments will have a light gap; if you need maximum light control and privacy, consider an outside mount.
Your blind or shade will be made slightly smaller than the size you specify to allow operating clearance. Do not add to the size of your product for a tighter fit. If you do, it will not fit properly inside your window.
2. Measure the frame depth from the closed window, or any obstacle such as a window handle, crank or alarm sensor, to the edge.
Obstacles can interfere with your treatment's operation, and you may wish to consider an outside mount.Mounting outside window frame
Outside mounts can make a window appear larger. When windows are not square, or there is insufficient frame depth for inside mounting, an outside mount is recommended.
Please note that a minimum of 2" flat surface above the window or on the window frame is required for mounting brackets (most product styles).Download complete measure guide.
Outside Mountshades are mounted on your wall or molding. Even if windows have enough frame depth for Inside Mount, you may prefer the extra room darkening and privacy Outside Mount provides.
Inside Mount shades are contained within the window frame. Our Honeycomb Shades require at least a 3/4" frame depth for Inside Mount (required depth varies with some upgrades). You may prefer an Inside Mount because it provides a finished look without covering the molding; it also allows more clearance to layer Drapery, a Valance or Cornice over shades. Before choosing Inside Mount, be sure to check windows for "squareness", as Inside Mounted shades will not operate properly or hang attractively if windows are not "square."
See Measure Guide.
Side Mount is useful when shades cannot be mounted to the top of the window frame. Side Mount Brackets for shades up to 60"w x 72"h as a No Charge Option.
Integrate the appearance of side-by-side windows and increase light control options by combining up to three independently operating shades on one headrail.Minimum width for Multiple Shades on One Headrail is 26"Headrail What's this
Multiple Shade Dimensions
Left Width (in.)
Right Width (in.)
Operate your shades more easily + conveniently, with enhanced safety, by adding Cordless Lift or Loop Control.
Loop Control allows you to raise your shade smoothly with little effort. This feature allows for even placement of your shade when it is partially raised. Cord loop length depends on the height of your shade; standard length is approximately 2/3 the height of the shade or you may choose a longer or shorter length depending on your specific needs. Loop control cords are available in larger set sizes up to 144".
Cordless Lift allows you to raise and lower your shade using a handle that is located on the bottom rail of your shade. Cordless lift is a perfect addition to any shade being placed in a child's bedroom as it eliminates control cords.
NEW! Motivia Motorization Raise and lower shades with the touch of a button - Motivia is the most affordable and user-friendly motorization available. Shades without lift cords are the safest option for homes with children and pets, and Motivia motorization is simple and easy to install and use.
Lower your shades from the top to let in sunlight with Top Down/Bottom Up or Cordless Top Down/Bottom Up.
Cord loop length depends on the height of your shade; standard length is approximately 2/3 the height of the shade or you may choose a longer loop length depending on your specific needs.
Loop Length [clear]
Custom Length (in.)
Standard Lift (shown left) cords raise, lower and position your entire shade. Select either left- or right-side location for your cords, taking into consideration your room configuration, ease of reaching lift cords behind furniture, etc.
Top Down/Bottom Up shades will have cords on both sides; one to control lowering the shade from the top, the other to control raising it from the bottom.
If you select Loop Control, please specify cord position as left or right. Loop control allows you to easily and precisely lower and raise you shade with a continuous cord.
If you select Multiple Shades on One Headrail, please specify cord position for each shade. A cord cleat will also be provided with your shade, which must be installed and used properly to keep dangling lift cords out of the reach of small children and pets.
Motivia Remote Raise and lower an entire room of window treatments with a single remote. Individual shades are outfitted with battery-powered motors. One remote will operate up to 5 shades. Order the remote on the first shade. Select Motivia Remote without remote control for up to 4 more shades. If you want additional remotes, simply order them on the individual shades.
One remote can operate multiple shades.
Battery Pack Wire The 10" wire will have the battery pack clipped to the headrail of the shade. The 48" battery wire allows you to mount the battery wand lower in the window, to make changing batteries easier. Perfect for very tall windows, or for situations where it's otherwise awkward to get to the top of the shade. You may mount the wand in the window frame as much as 4 feet below the top of the shade with this option.
Motivia Motorization Channel Each channel on our 5-channel Motivia remote controls an individual shade, or a group of shades. Simply select the channel you'd like to assign your shade to, and we'll pre-program the remote accordingly. To have a group of shades work from the same channel, select the same channel number while customizing your additional shades.
If you change your mind later, it's easy to re-assign channels. Simple instructions will arrive with your shade.
Your Honeycomb Shade comes standard with premium top and bottom rail options. Select from either Fabric Wrapped in your shade's material for a consistent look top to bottom, or a metallic finish in either Bronze or Brushed Nickel finishes. If you select a shade with Cordless Lift, Loop Control or Motorization, your headrail will be larger.
Upgraded Lift Bronze Upgraded Lift Brushed Nickel Upgraded Lift Fabric Wrapped Standard Control Bronze Standard Control Brushed Nickel Standard Control Fabric Wrapped
To keep the bottom of your shades in place, mount our complimentary Hold-Down Clips in the lower corners. This is especially helpful in high-wind locations or for shades placed on doors.
Extension brackets are used for outside mount installation requiring additional clearance between the window treatment and the mounting surface. Extension brackets allow you to clear obstructions such as molding, window cranks, door handles, etc.
- Operating Pole
Review your selection below-you can click on any option to review or make changes. Once you have completed & confirmed your information, add the item to your cart.
- Size & Mount:
- Rail Color:
- Product Label:
- Size & Mount:
- Rail Color:
- Product Label: