Your Luxe Linen Honeycomb Shade comes standard with premium top and bottom rail options. Select from either Fabric Wrapped in your shade's material for a consistent look top to bottom, or a metallic finish in either Bronze or Brushed Nickel finishes. If you select a shade with Cordless Lift or Loop Control options, your headrail will be larger and is available as Fabric Wrapped, Bronze or Brushed Nickel finishes.
Outside Mountshades are mounted on your wall or molding. Even if windows have enough frame depth for Inside Mount, you may prefer the extra room darkening and privacy Outside Mount provides.
Inside Mount shades are contained within the window frame. Our Honeycomb Shades require at least a 3/4" frame depth for Inside Mount (required depth varies with some upgrades). You may prefer an Inside Mount because it provides a finished look without covering the molding; it also allows more clearance to layer Drapery, a Valance or Cornice over shades. Before choosing Inside Mount, be sure to check windows for "squareness", as Inside Mounted shades will not operate properly or hang attractively if windows are not "square."
Integrate the appearance of side-by-side windows and increase light control options by combining up to three independently operating shades on one headrail.Minimum width for Standard Lift is 16"; Minimum width for Loop Control is 36"
Standard Lift: Raise + lower shades with control cord; comes with cord cleat to keep dangling lift cords out of reach of small children or pets.
Cordless Lift: Lightly push handle up or pull down to precisely position shades. System replaces lift cords making shade more convenient and safe. Also available with Top Down/Bottom Up.
Loop Control: Evenly raise, lower shades with a continuous loop secured by cord guide which eliminates dangling cords for added safety. Also available with 2 on 1 Headrail or Top Down/Bottom Up. Your cord loop length depends on the height of your shade; standard length is approximately 2/3 the height of the shade or you may choose a longer or shorter length depending on your specific needs. Loop control cords are available in larger set sizes up to 180".
Top Down/Bottom Up: Lower shades from top to let in sunlight while preserving privacy, or raise conventionally from bottom with cords on outer sides of shade.
2 on 1 Headrail Operate two independent side-by-side shades under one single headrail for maximum operating flexibility. Each shade will have its own lift cord.
Lift cords raise, lower and position your entire shade. Select either left- or right-side location for your cords, taking into consideration your room configuration, ease of reaching lift cords behind furniture, etc. A cord cleat will also be provided with your shade, which must be installed and used properly to keep dangling lift cords out of the reach of small children and pets.
Hold Down Clips No charge option Hold-Down Clips are mounted at the lower corners of your shades to prevent the bottoms from moving; a great choice for shades mounted on doors or in windy locations.
Extension brackets are used for outside mount installation requiring additional clearance between the window treatment and the mounting surface. Extension brackets allow you to clear obstructions such as molding, window cranks, door handles, etc.
Luxe Linen Shades that are installed in hard to reach windows can be opened and closed with the use of an operation pole. Choose an expandable 6ft or 12 ft operating pole. Available for shades ordered with Cordless Lift system only. Operation pole will be blue in color.