Optilight Twin Cell Honeycomb Shades

Enter the dimensions for your custom design in inches.

Outside Mountshades are mounted on your wall or molding. Even if windows have enough frame depth for Inside Mount, you may prefer the extra room darkening and privacy Outside Mount provides.

Inside Mount shades are contained within the window frame. Our Honeycomb Shades require at least a 3/4" frame depth for Inside Mount (required depth varies with some upgrades). You may prefer an Inside Mount because it provides a finished look without covering the molding; it also allows more clearance to layer Drapery, a Valance or Cornice over shades. Before choosing Inside Mount, be sure to check windows for "squareness", as Inside Mounted shades will not operate properly or hang attractively if windows are not "square."

See Measure Guide.

Side Mount is useful when shades cannot be mounted to the top of the window frame. Side Mount Brackets for shades up to 60"w x 72"h as a No Charge Option.

Even wide windows can have a uniform, streamlined appearance with one headrail for up to four side-by-side shades.The minimum width for 2-on-1 Headrail is 26".

Select Pleated Sheer top portion of your shades from three smooth or three striated texture solids. These neutral tones are easy to decorate with and complement all of the colors offered in our Honeycomb Shades.

To operate three ways, just raise or lower to suit your needs: separate lift cords to let you lower the sheer portion for more view; raise the Honeycomb portion for light control + insulation; or choose any combination of the two.

Cordless Lift System allows for safe and cord-free operation of your shade, making it ideal for homes with small children: Lightly push the handle up or pull down to position shades.

2 on 1 Headrail is ideal for wide windows. Two side-by-side shades mount under one bracket rail to create a unified look; each shade operates independently, increasing your light control options

.

The cord control allows you to raise and lower your shade. OptiLight Honeycomb Shades comes standard with cords on both sides of the shade.

Cord cleats to tie off control cords will come with your shade when standard lift is ordered. Cord cleats eliminate dangling cords for added child and pet safety.

No charge option Hold-Down Clips are mounted at the lower corners of your shades to prevent the bottoms from moving; a great choice for shades mounted on doors or in windy locations.

Used for outside mount installation requiring additional clearance between the window treatment and the mounting surface.

Clear obstructions such as molding, window cranks, door handles, etc.