Step 1 of 6


Step 2 of 6


Step 3 of 6


Step 4 of 6


Step 5 of 6

6Product Label

Step 6 of 6

Review Your Order

New this season
  • Filigree/ Mist 17739
    Loading swatch...
    • Material: Filigree  Mist
    • SKU: 17739
  • Lena/ Mist 17738
    Loading swatch...
    • Material: Lena  Mist
    • SKU: 17738
  • Ming/ Harbor 17740
    Loading swatch...
    • Material: Ming  Harbor
    • SKU: 17740
  • On Point/ Jojoba 17736
    Loading swatch...
    • Material: On Point  Jojoba
    • SKU: 17736
  • Orbs/ Soft White 17735
    Loading swatch...
    • Material: Orbs  Soft White
    • SKU: 17735
  • Sarong/ Cruise 17742
    Loading swatch...
    • Material: Sarong  Cruise
    • SKU: 17742

View all

    • Width: Measure the width you wish to cover: all styles come with fullness built in, so order exact width needed. If space allows, we recommend adding 6" to 12" on each side, beyond window edges: this makes windows look larger and allows fabric to stack clear of windows when drapes are fully open. Wave Fold Drapery is available in set widths only. You will want to choose the size that is closest to the area you wish to cover, if necessary choose a size that is wider than your area to avoid any light gaps.

      Height: Finished height is measured from top to bottom, including tabs or rod pockets. Drapery is most often ordered to be installed 4" above the window or near the ceiling (be sure to add these extra inches to your final measurements). All Drapery styles can be ordered as Valances up to 20" in length.

      Dimensions    What's this  
      • Measuring Guide
      • Width (in.)
      • Height (in.)
    • You may order your drapery as Single Panels or in a Pair.

      A pair will have two equal panels (the width measurement provided split equally in half).

      Single panel will be made as one panel and you choose open to left or right. A center panel is most commonly used on very large windows where you would like a stationary panel in the center. This allows the outside panels to be opened to let in light but keep your design element in the center.

      Single Or Pair    What's this  
      Single Or Pair [clear]
    • Highlight your drapery fabric with your choice of grommets. An array of metal finishes lets you achieve the perfect look. The grommet measures 1 1/2" in diameter so we recommend ordering hardware that is 1" or less in diameter.

      Grommet Color    What's this  
      Grommet Finish[clear]
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
    • For easy installtion of your drapery, we'll pre-place your drapery pins in your choice of two intervals: standard placement, to achieve a looser and more relaxed look, request 10"; for a crisper look, request 6" placement.

      Pin set choice is available on all Pleated Drapery styles plus Soft Top Drapery. Choose from 1-1/2" for Basics Traversing rod styles, or 3/8" for rings or Decorative traversing rods.

      You can also choose to hang your drapery using hardware rings. To find out how many rings you will need for your size drapery, please review the charts below.

      Soft Top Drapery (150% fullness) - Finished WidthRing Quantity w/6" spacing Ring Quantity w/10" spacing
      12 - 31"95
      31 1/8" - 49"138
      49 1/8" - 67"1711
      67 1/8" - 85"2213
      85 1/8" - 103"2616
      103 1/8" - 121"3118
      121 1/8" - 140"3521
      140 1/8" - 158"4024
      158 1/8" - 175"4427

      Soft Top Drapery (200% fullness) - Finished WidthRing Quantity w/6" spacing Ring Quantity w/10" spacing
      12 - 24"95
      24 1/8" - 37"138
      37 1/8" - 50"1711
      50 1/8" - 60"2213
      60 1/8" - 76"2616
      76 1/8" - 90"3118
      90 1/8" - 103"3521
      103 1/8" - 116"4024
      116 1/8" - 129"4427

      Pin Placement    What's this  
      Pin Spacing [clear]
      Pin Set [clear]
    • Select 2" pocket to accommodate rods up to 1 3/8" in diameter; or 4" pocket for rods up to 2" in diameter.

      Rod Pocket Size    What's this  
      Pocket Size [clear]
    • Choose 3" Tab to fit rods up to 1 3/8" in diameter or 5" Tab to fit rods up to 2" in diameter.

      Tab Size    What's this  
      Tab Size [clear]
    • Your drapery comes standard with fullness built in. Please see the chart below for fullness built in by style and additional upgrade availability. Fullness upgrade is recommended for sheers and other light weight fabrics. 150% fullness means your drapery will be 1 1/2 times the width you order; example if you order a drapery 100" wide the overall flat width will be 150" wide. Same will apply to 200% and 250% fullness; 200% would be 2 times the ordered width and 250% would be 2 1/2 times the ordered width if laid out flat.

      Maximum width for 200% fullness as an upgrade is 157"

      Drapery StyleStandard FullnessFullness Upgrade
      Hidden Tab150%200%
      Rod Pocket150%200%
      Rod Pocket Top & Bottom150%N/A
      Soft Top150%200%
      Tab Top150%200%
      Tie Top150%200%
      Fullness    What's this  
      Fullness [clear]
    • Layer
    • Lining choices protect your privacy and your investment. Guard against the fading and damage of sun exposure, while creating more privacy!

      Privacy Lining blocks sun and adds insulation to panels and draperies.

      Our 3-Ply Blackout Lining blocks light completely and is available in White or Ivory to suit your needs.

      New Insulation Lining is white sateen on the outside to improve your street side appearance, while flannel on the inside adds more insulation than standard privacy lining. Two layers in one lining make shades and drapery easier to dress and add heft to lighter-weight fabrics. Available in White or Ivory.

      Note: We recommend Lining for 100% linen materials in order to prolong the life of the fabric, protecting your treatment from sunlight. Lining also helps prevent UV ray damage of flooring and interior furnishings. Fabrics that are 100% silk require lining.

      Lining    What's this  
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
    • Finish off a leading edge of drapery with Decorative Ribbon Banding.

      Ribbon Banding    What's this  
      Ribbon Banding[clear]
      • answer image
      • answer image
    • Banding may be added flush with, or inset 1-1/4" from, the edge. Banding will be placed on the leading edge (the edge that is used to open/close the drapery) or you can choose to have it placed on both edges. Applying the banding to both edges is most commonly used on a center drapery.

      Banding Placement    What's this  
      Trim Placement [clear]
    • Product Label
      Room Type [clear]
      Window Description

    Review your selection below-you can click on any option to review or make changes. Once you have completed & confirmed your information, add the item to your cart.

    • Material:
    • Size:
    • Panels:
    • Lining:
    • Trim:
    • Product Label:

    This item has been added to your cart.

    • Material:
    • Size:
    • Panels:
    • Lining:
    • Trim:
    • Product Label:

    TOTAL $ Tell us your dimensions to see prices