Inside Mount shades are contained within your window frame. You may prefer an Inside Mount as it provides a finished look without covering your molding; also allows more clearance to layer Drapery, or Valance over shades. Be sure to check your windows for "squareness", since Inside Mounted shades will not operate properly if windows are not "square."
Outside Mount shades are mounted on your wall or molding. Even if your windows have enough frame depth for Inside Mount, you may prefer the extra room darkening and privacy Outside Mount provides, since greater window coverage reduces light leak at shade edges. Please note that to accommodate the roller mechanism, your finished shade fabric will be 1-5/16" to 1-5/8" narrower than you specify on your order, causing a light gap with Inside Mount. If you require maximum light control and privacy, we recommend Outside Mount.
Side Mount is useful when shades cannot be mounted to the top of the window frame.
Loop Control replaces traditional spring mechanism with a loop mechanism for smooth operation. This feature allows for even placement of your shade when it is partially raised.
When ordering Loop Control, you have a choice for your bead chain color and material. The beaded loop control is available as a plastic or metal chain. Plastic bead chains are available in white or black; Metal bead chains are available in bronze or silver.
Cord loop length depends on the height of your shade; standard length is approximately 2/3 the height of the shade or you may choose a longer or shorter length depending on your specific needs.
Cordless Lift System eliminates lift cords for child safety; features slow rise system for smooth, controlled operation. Minimum width is 19 1/2 inches wide.
Specify Left or Right for Loop Control lift system. A cord tensioner comes standard for safety and must be secured for shade operation.
Cordless lift system operates with a slow-rise system that provides a controlled, smooth raise free of cords. Shade stays in place where released. Cordless shades are operated by using the bottom bar or shade pull.
Practical as well as decorative, our Wooden Ball Pulls make it easy to raise and lower your Classic Roller Shades + keep your shade material clean. Select from White, Natural, Oak or Brown to complement your shade fabric. $12
Standard Roll shades have the fabric rolling off the back of the shade. Reverse Roll shades have the fabric rolling off the front of the shade.Consider Reverse Roll for Room Darkening, Nightshade and Pattern materials to avoid seeing the white backside on the roller. Not available with Decorative Cassette System.