1Material

Step 1 of 7

2Openess

Step 2 of 7

3Size & Mount

Step 3 of 7

4Controls

Step 4 of 7

5Valance

Step 5 of 7

6Hardware

Step 6 of 7

7Product Label

Step 7 of 7

Review Your Order

New this season
  • Synergy/ Americano 13098
    Loading swatch...
    • Material: Synergy  Americano
    • SKU: 13098
  • Synergy/ Coffee Bean 13099
    Loading swatch...
    • Material: Synergy  Coffee Bean
    • SKU: 13099
  • Synergy/ Latte 13097
    Loading swatch...
    • Material: Synergy  Latte
    • SKU: 13097
  • Synergy/ Panna 13096
    Loading swatch...
    • Material: Synergy  Panna
    • SKU: 13096

View all

    • We offer four levels of opacity (openness), ranging from 1% up to 10%. A low number means that the fabric is more tightly woven, which blocks more sun and allows less view-through to the outdoors. A higher number fabric is more loosely woven; glare is still controlled, though less heat is blocked, and there is more view-through. To choose, consider both your need to control light and to see your view. If it's very hot in your room during the summer, a 1% fabric is a good choice. If you don't get much direct sun, or want to preserve your view as much as possible, choose a 10% fabric. Want to balance seeing your view and blocking the sun? Choose 3% or 5% fabrics.

      Openess    What's this  
      Openess[clear]
      • answer image
      • answer image
      • answer image
      • answer image
    • Enter the dimensions for your custom design in inches. Please note that to accommodate the roller mechanism, your finished shade fabric will be 1-5/16" to 1-5/8" narrower than you specify on your order, causing a light gap with Inside Mount. If you require maximum light control and privacy, we recommend Outside Mount.

      Dimensions    What's this  
      • Measuring Guide Installation Instructions
      • Width (in.)
      • Height (in.)
    • Inside Mount shades are contained within your window frame. You may prefer an Inside Mount as it provides a finished look without covering your molding; also allows more clearance to layer Drapery, or Valance over shades. Be sure to check your windows for "squareness", since Inside Mounted shades will not operate properly if windows are not "square."

      Outside Mount shades are mounted on your wall or molding. Even if your windows have enough frame depth for Inside Mount, you may prefer the extra room darkening and privacy Outside Mount provides, since greater window coverage reduces light leak at shade edges.

      Side Mount is useful when shades cannot be mounted to the top of the window frame.

      Note: To accommodate the roller mechanism, your finished shade fabric will be 1-5/16" to 1-5/8" narrower than you specify on your order, causing a light gap with Inside or Side Mount. If you require maximum light control and privacy, we recommend Outside Mount.

      Mount    What's this  
      Mount[clear]
      • answer image
      • answer image
      • answer image
    • Two separate, independently operating shades on one headrail make it easier to control light and privacy. Ideal choice for wider windows.

      Headrail    What's this  
      Headrail[clear]
      • answer image
      • answer image
    • Multiple Shade Dimensions    What's this  
      • Left Width (in.)
      • Right Width (in.)
    • NEW! Motivia Motorization Raise and lower shades with the touch of a button - Motivia is the most affordable and user-friendly motorization available. Shades without lift cords are the safest option for homes with children and pets, and Motivia motorization is simple and easy to install and use.


      Loop Control replaces traditional spring mechanism with a loop mechanism for smooth operation. This feature allows for even placement of your shade when it is partially raised.


      Cordless Lift System eliminates lift cords for child safety; features slow rise system for smooth, controlled operation. Please note Minimum width is 19 1/2 inches wide. Maximum height for cordless lift will vary depending on fabric choice. For specific questions about size restrictions please contact customer care at 800-248-8888.

      Lift System    What's this  
      Lift System[clear]
      • answer image
      • answer image
      • answer image
    • When ordering Loop Control, you have a choice for your bead chain color and material. The beaded loop control is available as a plastic or metal chain. Plastic bead chains are available in white or black; Metal bead chains are available in bronze or silver.

      Cord loop length depends on the height of your shade; standard length is approximately 2/3 the height of the shade or you may choose a longer loop length depending on your specific needs.

      Control Color & Size    What's this  
      Bead Chain Color [clear]
      Loop Length [clear]
      • Custom Length (in.)
    • Motivia Wand A battery-powered wand is attached directly to the shade, and simply press a button to operate.


      Motivia Remote Raise and lower an entire room of window treatments with a single remote. Individual shades are outfitted with battery-powered motors. One remote will operate up to 5 shades. Order the remote on the first shade. Select Motivia Remote without remote control for up to 4 more shades. If you want additional remotes, simply order them on the individual shades.

      Motorization Control    What's this  
      Motorization Control[clear]
      • answer image
      • answer image
      • answer image
    • Battery Pack Wire The 10" wire will have the battery pack clipped to the headrail of the shade. The 48" battery wire allows you to mount the battery wand lower in the window, to make changing batteries easier. Perfect for very tall windows, or for situations where it's otherwise awkward to get to the top of the shade. You may mount the wand in the window frame as much as 4 feet below the top of the shade with this option.

      Control Size    What's this  
      Battery Pack Wire [clear]
      Wand Size [clear]
      • Wand Length (in.)
    • Specify Left or Right for the control position. Consider furniture placement or other obstructions when making your selection.

      Control Position    What's this  
      Control Position [clear]
    • Motivia Motorization Channel Each channel on our 5-channel Motivia remote controls an individual shade, or a group of shades. Simply select the channel you'd like to assign your shade to, and we'll pre-program the remote accordingly. To have a group of shades work from the same channel, select the same channel number while customizing your additional shades.

      If you change your mind later, it's easy to re-assign channels. Simple instructions will arrive with your shade.

      Channel To Program    What's this  
      Channel To Program [clear]
      Left Shade Channel To Program [clear]
      Right Shade Channel To Program [clear]
    • A valance conceals the control mechanism and will hide the shade when rolled up.

        Aluminum valances are available in 5 color choices, White, Bronze, Black, Brushed Aluminum and Ivory. The aluminum valance is available in two heights of 3" or 4" to fit your design needs.

        Decorative Cassette is available in 3 colors White, Bronze, Black, with a matching fabric insert and is required for Motivia Wand control or 2on1 Headrail.

      Valance    What's this  
      Valance[clear]
      • answer image
      • answer image
      • answer image
      • answer image
    • Standard Roll shades have the fabric rolling off the back of the shade.


      Reverse Roll shades have the fabric rolling off the front of the shade. Not available with Decorative Cassette System.


      Consider Reverse Roll for Room Darkening, Nightshade and Pattern materials to avoid seeing the white backside on the roller.

      Roll Direction    What's this  
      Roll Direction[clear]
      • answer image
      • answer image
    • Rail Color    What's this  
      Headrail Color [clear]
    • Practical as well as decorative, our Shade Pulls make it easy to raise and lower your Classic Roller Shades + keep your shade material clean. Select from a variety of styles to suit your design needs.
      Pull    What's this  
      Shade Pull[clear]
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
      • answer image
    • Extension brackets are used for outside mount installation requiring additional clearance between the window treatment and the mounting surface to clear obstructions such as moulding, window cranks, door handles, etc.


      Hold down clips are mounted at the bottom of the window treatment and are used to hold the shade in place. This option is great for securing your treatment on doors or in windy locations.

      Hardware    What's this  
      Extension Brackets [clear]
      Hold Downs [clear]
    • Product Label    What's this  
      Room Type [clear]
      Window Description
    • Order Type    What's this  
    REVIEW

    Review your selection below-you can click on any option to review or make changes. Once you have completed & confirmed your information, add the item to your cart.

    • Material:
    • Openess:
    • Size & Mount:
    • Controls:
    • Valance:
    • Hardware:
    • Product Label:

    This item has been added to your cart.

    • Material:
    • Openess:
    • Size & Mount:
    • Controls:
    • Valance:
    • Hardware:
    • Product Label:

    TOTAL $ Tell us your dimensions to see prices