Wrought Iron hardware rods are available as single, double, inside mount, Corner, or Bay rod sets. Double rod sets will come with a 1" back rod and end cap finials. Maximum width for inside mount rod sets is 72",Corner rods have a maximum width of 192" and Bay rods the maximum width is 120" per rod. Rod widths over 96" will be spliced.
Wrought Iron hardware offers 6 finial choices for each diameter of hardware (1" Medium or 1 1/2" Grand). Finials will add to the overall width of your hardware. When ordering your hardware be sure to take into account the finial dimension listed below. The width of the finial will be added to each side of your hardware rod.
Wrought Iron brackets are included with your hardware rod.
Double rod brackets will have two different clearance dimensions. The Medium Double hardware front rod will have 2 1/8" on the back rod and 4 1/4" on the front rod for clearance and 5 1/2" projection. When ordering inside mount brackets they have a 7/8" projection for medium hardware brackets.
Wrought Iron hardware rings are available in packs of 10. You may order a standard ring or where a center support bracket is used you must order a C ring to be able to traverse pass the center support bracket.
Wrought Iron hardware tiebacks are available as a u shape tieback or as a post. U-bend tieback is available with an Endcap or Acanthus design. Post tiebacks are available with an endcap, ball or scroll design. You can purchase a single tieback or as a pair.